Drawing the lines on okume triplay, according to plans, with the help of an aluminum baten to make the curves. Cutting the planks, simultaneoustly, right and left side, clamping two sheets of triplay with C clamps. Good help of my 5 year old son wiring the planks. Placing and wiring of transoms, after wiring plank 2. Wiring finished, now it is time to tight the wires. Hull upside down to apply glue to intersections of the planks, I use as the manual says, a mix of epoxy and cab-o-sil powder. |
All the planks cut and ready to rabbet.
Almost Finish, wiring plank 4. Detail of plank gluing.
|